The bitumen primer is modified with synthetic rubbers and additives, which ensure deep penetration even in wet substrates. The product is perfect for temperate climates and creates a coating with high frost resistance (similar to asphalt repair for road damage). After drying, a durable monolithic coating is formed.
The aim:
• for priming the base before covering with bitumen mastic.
• for priming the base before gluing bitumen roll roof coverings.
• for waterproofing underground and buried structures.
PREPARATION
Do not use on frozen or flooded surfaces. Clean the surface of dirt, glue, dust, loose parts and sharp edges. Clean the rust from the metal surface. If the surface is porous, level it with cement mortar and fill the voids.
USE
Use cold. When working in the cold season, it is recommended to place the package with the product in a warm room for 1-2 days to make it easier to work. Mix well before use. To prime the surface, apply 1 layer with a brush. For waterproofing, apply 3 layers with a brush or sprayer, each after the previous layer has dried. The product contains an organic solvent – do not use it in contact with polystyrene foam. For outdoor use only, do not use in areas where it is in direct contact with living spaces such as above ground balconies and terraces. Do not heat over an open flame.
TECHNICAL DATA
• drying time: up to 12 hours
• number of layers: for priming – 1 layer, for waterproofing – 3 layers.
• consumption: 0.2-0.4 kg/m² per layer
• air and substrate temperature during use: from +5°C to +35°C.
• non-stick surface: after 6 hours.
• Cleaning of tools: with white spirit or other organic solvent.
DANGEROUS!
Contains: Ligroin solvent, xylene and styrene fraction. H226 – Flammable liquid and vapour. H315 – Irritating to skin. H319 – Causes severe eye irritation. H361 – Suspected of damaging fertility or the unborn child. P102 – Keep out of reach of children. P202 – Do not use unless all safety warnings have been read and understood. P210 – Keep away from heat sources/sparks/open flames/hot surfaces. – Does not smoke. P280 – Wear protective gloves/ protective clothing/ eye (face) protection. P303+P361+P353 – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Wash the skin with a jet of water. P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easily removable. Continue to wash your eyes. P403+P235 – Store in a well-ventilated place. Store in a cool place.
Technical data and information are provided for use at a temperature of +23°C ± 2°C and a relative humidity of approximately 50%. Lower temperatures and higher humidity increase the drying time.
STORAGE
Store in a cool, dry place in a tightly closed package. Can be stored at minus temperature. Protect from direct sunlight.
Production date and expiration date on the package.
Storage and loading – on 3 floors.
Manufacturer: Izolacja Matizol Sp. z o. EU