Special acrylic paint on solvents. It stands out with excellent water resistance, flexibility, mechanical strength, particularly strong adhesion to mineral bases, good weather resistance. Allows dyeing at low temperatures.

PURPOSE: for painting concrete, cement, ceramic and other mineral surfaces inside and outside buildings, as well as for painting primed metal surfaces. It is used for decorative and protective painting of underwater and surface parts of swimming, decorative and technical pools; industrial clarifiers, fire extinguishers and other containers and cisterns for technical water storage.

SURFACE PREPARATION: clean the surface from old peeling coatings, dirt, dust, rust and other impurities, degrease it. The surface must be dry and clean, without cracks or other defects. The temperature of the surface, paint and air must be above -10 °C, the relative humidity of the air must be less than 80%. Concrete, lime-cement (new ones must be aged for at least a month), as well as other absorbent surfaces with STRONG® organically soluble acrylic primer according to the application instructions.

USE: before use, mix the paint thoroughly, if necessary, dilute to the required viscosity with Kompozit® solvent (up to 10%). Apply by roller, brush or spray in 2 even flawless coats. The drying time at a temperature of +20 °C and a relative humidity of 50% is up to 2 hours, the next layer can be applied after 4 hours, but this time increases as the temperature decreases and the layer thickness increases. layer. Constant contact with water is recommended no earlier than 7 days after painting. The degree of coverage in 1 layer is 6-8 m2/kg, depending on the roughness and porosity of the surface.

STORAGE AND SAFETY CONDITIONS: store and transport in a container sealed by the company at a temperature from -20 to +30 °C, out of the reach of children. DANGEROUS! Contains solvents. Protect from fire, heating devices, direct sunlight and moisture. Use protective clothing and gloves when applying, and an additional respirator when spraying. Effective ventilation is required. Wash working tools with Kompozit® Solvent. The container and product residues are disposed of after drying