Water dispersion decorative and protective acrylic varnish for exterior and interior works. Contains a wax composition, protects against moisture and dirt, reduces the risk of peeling. A special antiseptic component reliably protects the surface from the growth of fungi, algae and lichen. Provides long-term resistance to service loads, heat (up to 120 °C dry heat), water and biological damage.

PURPOSE: is used as an independent transparent coating (varnish with “wet stone” effect) for decorative stone and bricks, decoration of house facades and plinths, fireplaces, as well as various interior elements. Do not use on floors, stairs, terraces, etc. horizontal surfaces.

USE: before application, mix the varnish thoroughly to distribute the components evenly. Applying the first coat to absorbent surfaces may require several wet-on-wet coats as the lacquer soaks in. The finishing coating is applied with a brush, dipping or spraying in 1-3 equal layers (as the number of layers increases, the gloss, density and protective properties of the coating are improved, the final result depends on the type of coating and the porosity of the base). Drying time at temperature +20 °C and relative air humidity 50%: from dust – 30 minutes, application of the next layer is possible after 2 hours. Surface coverage coefficient: 8-12 m2/l in 1 round.

STORAGE CONDITIONS AND SAFETY: store and transport in a patented hermetic container at a temperature from +5 to +35 °C, out of the reach of children. Protect from direct sunlight and heating devices. Freezing and storage in diluted form is not allowed. It is forbidden to consume food and drinks during work. Use protective clothing and gloves when handling, and an additional respirator when spraying. Wet work tools must be cleaned of varnish residues without allowing them to dry and rinsed thoroughly with water. Containers and varnish residues are disposed of as construction waste after drying

Country of manufacture: Ukraine