For laying insulation, finishing panels, decorative elements of any size, steps, skirting boards, window sills. Excellent adhesion to many building materials: polystyrene insulation panels (NEOPOR, EPS, XPS), polyurethane panels (PIR), phenolic foam panels (PF), hard wool, wood, concrete, masonry blocks, ceramic and stone tiles, metal, gypsum, OSB, aluminum and others.

Application. The surface must be clean. Wipe off dust and grease from the surfaces. When working, wear protective gloves and eye protection. The gun must be installed with the valves up. After connecting the gun, shake the cylinder thoroughly (about 30 seconds). At low humidity (relative humidity less than 50%), the substrate must be moistened, as the foam expands under the influence of moisture. Spray at least three strips on each thermal insulation panel. After spraying the adhesive, wait 3-6 minutes (maximum 7 minutes), then press the panel to the wall. The surfaces of the joined panels can be leveled by careful adjustment 5 minutes after pressing. If there are gaps between the insulation panels, they must be filled with the same adhesive. Remove excess adhesive using a special cleaner or acetone. Protect from sunlight.

Consumption: ~ 12m2

Country of manufacture: EU