For thermal insulation of attics, balconies, bathrooms, garages, basements, tanks, reservoirs, etc. Ideal for insulating uneven or curved surfaces and hard-to-reach places. Suitable for use on all types of surfaces, except PE, PP. PTFE and silicone for thermal and sound insulation. Helps reduce thermal bridges and prevents condensation. We recommend that each surface be tested for adhesion and compatibility in advance. Surfaces to be painted must be clean and dust-free. Ambient temperature from +5°C to +35°C, ideally around +20°C. The temperature in the cylinder ranges from +18°C to +25°C, optimally around +20°C. The hardened foam can be painted with solvent-free paint.

Usage. Place the nozzle on the tip of the foam gun. Shake the can at least 20 times. Hold the aerosol can vertically and insert it into the gun. Do not turn the aerosol can upside down or screw the gun to it. Set the desired spray position (depending on vertical or horizontal spraying). Set the regulator to the maximum position. The foam output is regulated by pressing the trigger of the gun. Spray the foam from a distance of about 40 cm onto the surface. The sprayed foam expands twice as much. Do not spray more than 2.5 cm thick at a time. Within 15 minutes. – not sticky. If more coats are required, wait about 30 minutes before applying the next coat. Moisten after each coat.

Consumption: ~ 2.5 m2   2.5-3 cm thick.

Country of manufacture: EU