Water-dispersion latex paint for interior work, resistant to washing. Forms a snow-white matte coating, does not yellow over time.

PURPOSE: Intended for primary or repair painting of plaster, concrete, brick, putty surfaces, gypsum board, magnesite and wood fiber boards inside buildings. Used for painting walls and ceilings in rooms that require wet cleaning.

SURFACE PREPARATION: Clean the surface from dirt and dust. Remove old cracked and peeling coatings. The surface must be dry and clean. If necessary, level with putty, sand the dry surface and carefully remove dust. Before painting, the surface must be primed with an acrylic dispersion primer or (for slightly crumbling surfaces) a deep primer according to the instructions for use. New lime-cement surfaces must be cured for at least one month before painting.

APPLICATION: Stir the paint thoroughly before use, if necessary, dilute with water (up to 10%). The paint is applied with a roller, sprayer or brush with synthetic bristles in 2 layers. Drying time at +20°C and 50% relative humidity is 30 minutes, the next layer can be applied after 1-2 hours, but this time increases with a decrease in temperature and an increase in humidity.

The surface coverage rate in 1 layer is 5 – 7 m2/kg depending on the surface and application method.

STORAGE CONDITIONS AND SAFETY: store and transport in a labeled airtight container at a temperature of +5 to +35 °C, out of the reach of children. Protect from heating devices and direct sunlight. Use a respirator when spraying. Clean tools from liquid paint residues, then rinse with water. Container and product residues after drying are disposed of as construction debris.

Manufacturer: TM Kompozit