The mastic is intended for laying a seamless waterproofing coating, as well as for warming the underground parts of the building. Perfectly suited for a temperate climate, the mastic creates a coating with high resistance to cracking due to frost, the coating firmly connects to the surface and completely stabilizes its movement and microcracks.
The aim:
• for waterproofing of underground structures or their parts, reservoirs.
• for repairing bitumen roof coverings

PREPARATION:
Do not use on frozen or flooded surfaces. Clean the surface of dirt, glue, dust, loose parts and sharp edges. Clean the rust from the metal surface. If the surface is porous, level it with cement mortar and fill the voids. Highly absorbent concrete substrates, or substrates exposed to high water loads, should be primed with a bituminous primer and allowed to dry. Remove protruding pieces of roofing material and other debris before re-roofing. Curved areas should be cut crosswise and glued with cold glue, the surface should be primed.
USE:
Use cold. When working in the cold season, it is recommended to place the package with the product in a warm room for 1-2 days to make it easier to work. Mix well before use. To prime the surface, apply 1 layer with a brush or trowel. For waterproofing, apply 3 layers with a brush or sprayer, each after the previous layer has dried. The product contains an organic solvent – do not use it in contact with polystyrene foam. For outdoor use only, do not use in areas where it is in direct contact with living spaces such as above ground balconies and terraces. Do not heat over an open flame.
TECHNICAL DATA:
• consumption: 0.6-0.8 kg/m² per layer.
• number of layers: 2-3, depending on use.
• drying time: up to 12 hours;
• non-sticky surface: after 6 hours;
• air and substrate temperature during use: from +5°C to +35°
Cleaning tools: with white spirit or other organic solvents.
DANGEROUS! Contains: Ligroin solvent, xylene and styrene fraction. H315 – Irritating to skin. H319 – Causes severe eye irritation. H361 – Suspected of damaging fertility or the unborn child. P102 – Keep out of reach of children. P202 – Do not use unless all safety warnings have been read and understood. P280 – Wear protective gloves/ protective clothing/ eye (face) protection. P303+P361+P353 – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Wash the skin with a jet of water. P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easily removable. Continue to wash your eyes. P403+P235 – Store in a well-ventilated place. Store in a cool place.
Technical data and information are provided for use at a temperature of +23°C ± 2°C and a relative humidity of approximately 50%. Lower temperatures and higher humidity increase the drying time.
STORAGE:
Store in a cool, dry place in a tightly closed package. Can be stored at minus temperature. Protect from direct sunlight.
The production date and expiration date are indicated on the package.
Storage and stacking – on the 4th floor.
Manufacturer: “Izolacja Matizol” Sp. z o. o. EU