Anti-corrosion paint SVP Feesto

• Can be applied directly to rusty surfaces • Usually no primer or base paint is required • Provides long-term corrosion protection • Dries quickly

APPLICATION

The paint is intended for long-term protection and decoration of various metal surfaces, such as load-bearing steel structures, metal poles, fences, doors, gates, gutters and gutters, metal garden furniture, park and children’s playground equipment, metal tanks. Suitable for use in both exterior and interior decoration works.

The paint is suitable for treating new or previously painted ferrous metal surfaces. It can also be used to paint stainless steel, galvanized and non-ferrous metal (copper, aluminum, etc.) surfaces, if they have been previously primed

SURFACE PREPARATION

• For the painting process to be successful, careful pre-treatment of the metal surface is crucial! • The surface to be painted must be dry and free from grease, oil, dirt and rust. • Any flaking or loose rust on the surface must be removed with a scraper, wire brush or sandblasting. The required degree of cleanliness depends on the aggressiveness of the environment and must comply with the applicable standard. Steel surfaces most often require a cleanliness degree of St2 when cleaned with Application For interior and exterior finishing works.

Binder Alkyd Density 0.96-1.10 kg/l, depending on the shade and type of paint Dry matter content 50-70%, depending on the shade and type of paint Gloss level (Gardner 60°) Glossy/semi-matt/matt, depending on the type of paint Colour palette Various ready-made colours.

Drying time

Dry to the touch, after 2 hours (23 °C, 50% relative humidity). Can be repainted after 4 hours (when spraying at low pressure, can be repainted after 15 minutes).