Water-dispersion latex paint for interior work, resistant to washing. Forms a snow-white matte coating, does not turn yellow over time. The color can be tinted according to STANDART, NCS, RAL catalogs.

PURPOSE: Intended for primary or repair painting of plaster, concrete, brick, plastered surfaces, plasterboard, magnesite and fiber boards inside buildings. Used for painting walls and ceilings in rooms that require wet cleaning.

SURFACE PREPARATION: Clean the surface from dirt and dust. Remove old, cracked and peeling coatings. The surface must be dry and clean. If necessary, level with putty, sand the dry surface and carefully remove the dust. Before painting, the surface must be primed with an acrylic dispersion primer or (for slightly crumbling surfaces) a deep primer according to the instructions for use. New lime-cement surfaces must be cured for at least one month before painting.

USE: Before use, mix the paint thoroughly, if necessary, dilute with water (up to 10%). The paint is applied with a roller, sprayer or brush with synthetic bristles in 2 layers. The drying time at +20°C and 50% relative humidity is 30 minutes, the next layer can be applied after 1-2 hours, but this time increases as the temperature decreases and humidity increases.
The rate of surface coverage in 1 layer is 5 – 7 m2/kg, depending on the surface and application method.

STORAGE CONDITIONS AND SAFETY: store and transport in a labeled hermetic container at a temperature from +5 to +35 °C, out of the reach of children. Protect from heating devices and direct sunlight. Use a respirator when spraying. Clean the working tools from the remains of liquid paint, then rinse with water. The container and product residues are disposed of as construction waste after drying.

Country of manufacture: Ukraine