A thick-set, fast-drying, two-component, high-dry-residue epoxy coating.

A two component, low VOC, high solids, fast curing anti-corrosive epoxy coating -primer.

Both zinc phosphate and micaceous iron oxide pigmented versions are available. The micaceous iron oxide version conforms to BS5493:1977 KUID & KUIF

Specifically designed for application to abrasive blasted steel in atmospheric areas. Ideal for use in
moderately corrosive environments and where fast drying/rapid recoating is desired.
In maintenance and repair areas, an aluminium pigmented version is available for use over hand
prepared and hydroblasted steel surfaces.

Gloss Level.
Semi Gloss.

Volume Solids.
83%

Typical Thickness.
75-250 microns (3-10 mils) dry equivalent to
90-301 microns (3.6-12 mils) wet.

Theoretical Coverage.
6.60 m²/litre at 125 microns d.f.t and stated volume solids
266 sq.ft/US gallon at 5 mils d.f.t and stated volume solids.

Practical Coverage.
Allow appropriate loss factors.

Method of Application.
Airless Spray, Brush, Roller.

Manufactured by International Farg AB Sweden.

Full description