For artistic decoration and protective treatment of wood, styrofoam, paper, glass, plaster, concrete, metal and stone products for indoor and outdoor use. Give a special decorative effect: Metallic and pearl shine, imitation of expensive materials.

Used for decorative surface treatment: Interior decor elements, jewelry, souvenirs, wallpapers and textured plasters, etc. Preparation of the substrate: Thoroughly clean the surface of dust, dirt, rust and similar undesirable formations, then degrease the substrate. When painting on the surfaces of metal and cellular buildings, the base must be primed.

Instructions for use: Mix thoroughly before starting work. If necessary, the paint can be diluted with water to a maximum of 10% of the paint volume. To obtain a transparent coating with azure decorative effect (pearl, metallic, chameleon), decorative enamel can be mixed with water-based acrylic panel and furniture varnishes. Paint of different colors can be mixed with each other in any proportion.

Application tools: Brushes and rollers.

Drying time: At an air temperature of +20±2 ºС and a relative humidity of 50-70% no longer than 2 hours. The coating can be exposed to household detergents, without discoloration, no later than 3 weeks after application.

Storage conditions: Store in hermetically sealed original container at a temperature not lower than +5 ºС. Avoid heat and direct sunlight.

Safety instructions: In case of need for medical advice, the relevant information is indicated on the package or label. Protect from children. Use protective gloves/eye protection. SKIN CONTACT: Wash with plenty of soap/water. If skin irritation or rash occurs: seek medical attention. May cause an allergic reaction. The safety data sheet is available on request. Volatile organic compounds: <130 g/l (Interior or exterior coating colors for wood and metal, norm <130 g/l).

Manufacturer: LLC VK-LAKOFARBA, Ukraine