Ready-to-use special antiseptic agent
to protect the surface from a wide range of biological damage, up to 35 years. Does not change the natural color, structure and mechanical properties of surfaces, does not bleach. For internal and external use.

PURPOSE: For rapid destruction of fungi and prevention of development.
Used for fungi that stain (blue, mold) and destroy wood; for algae, lichens and other pests, as well as for the treatment of absorbent mineral surfaces. Used for the treatment of wooden and mineral walls and floors, lumber, products and structures inside rooms, especially in damp and poorly ventilated rooms.

Domestic water tanks, technical, decorative, swimming pool tanks, as well as facades, plinths, fences, garden furniture, etc. for outdoor treatment, provided they are protected from constant water exposure or before further priming, painting or varnishing. Can be used as an additive to mineral-based mortars. ATTENTION: do not mix with paints and varnishes containing polymer dispersions!

PREPARATION OF THE SURFACE: Clean the surface from massive growths of biological origin that are removed mechanically, peels, scales, coatings that prevent the absorption of liquids, dirt and dust. To restore the natural color of the affected wood, it is recommended to pre-treat with W1 Kompozit® Wood Bleach according to the instructions for use.

APPLICATION: Apply the product evenly to the prepared surface using the wet-on-wet method until saturated, using a brush or roller, sponge or sprayer. Apply to vertical surfaces from bottom to top. Application is possible at a temperature above 0 °C, treatment of a frozen surface is not allowed. The drying time of the product is up to 2 hours, further processing is possible after 4 hours. After treatment, swimming pools must be rinsed with water after 2 hours.

Surface coverage norm: 4 – 8 m2/l.
Instead of water, up to 25% of its total quantity is added to mortars.
Technical water to prevent flowering 0.2 – 0.5 l per 1 m3 of water every 1 – 2 months.

STORAGE CONDITIONS AND SAFETY: Store in a closed branded container at a temperature of +5 to +35 °C, out of the reach of children. Protect from direct sunlight and heating devices, prevent freezing. It is forbidden to eat, drink or smoke during work. Protective clothing, goggles and rubber gloves should be used during processing, and a respirator should be used when spraying. Rinse work tools thoroughly with water. Empty containers are discarded as construction debris.