IMPREGNANT FOR GRAVESTONES
a water-based solution that uses innovative fluoropolymer technology.
It is a formula without organic solvents, making the product safe for both users and the environment.

FEATURES
• Transparent protective barrier: a transparent protective layer that not only improves the appearance of tombstones, but also protects their surface
• Water and oil resistance: prevents the penetration of water, grease and dirt, effectively protecting stone tombstones from stains
• Preserves natural appearance: does not change the natural appearance of the stone, preserving the original aesthetics of the tombstones
• Does not yellow or form a coating: does not yellow or form a coating on the surface of the stone, providing long-lasting protection without compromising aesthetics
• Versatile use: suitable for tombstones made of various materials, such as granite, marble, terrazzo and other stones
• Protection against external factors: rain, frost, moss and other harmful atmospheric factors, helping to preserve their appearance and durability
• Ease of use: easy to apply to both new and older tombstones, providing comprehensive protection

INSTRUCTIONS FOR USE:
› The surface to be impregnated must be dry, clean and free of grease. It is important to remove all dirt, greasy stains, stains and efflorescence before impregnation.
› Stir the product thoroughly immediately before impregnation. Do not dilute. Always carry out a test on the substrate.
› The substrate must be impregnated with a brush, roller or sprayer, applying one or two coats using the “wet on wet” method.
› Do not apply an excessive amount of the preparation to the substrate, remove the excess before drying.
› On vertical surfaces, apply from the bottom up.
› Drying time is approximately 4 hours and depends on the conditions at the application site (temperature and humidity).

ADDITIONAL INFORMATION:
› Optimal conditions of use: temperature from +10°C to +30°C and relative humidity below 70%.
› Initial surface protection after 24 hours. Full protection after 7 days, until then do not clean the impregnated surface, protect from water and dirt, as well as mechanical damage.
› For the care of the impregnated surface, use mild detergents. Do not use rough sponges.
› Immediately clean spills from the impregnated surface. Prolonged contact of spilled liquids with the impregnated surface may cause slight discoloration.
› It is recommended to re-impregnate the surface after 1 year.
› After painting, wash tools immediately with water and detergent.

CONSUMPTION:
› 20–40 m²/l, depending on the application method, and in particular on the type and degree of absorption of the substrate. The effectiveness is indicated for one layer.

NUMBER OF LAYERS:
› 1 to 2 layers, depending on the type and degree of absorption of the substrate.

Manufacturer: Inchem Polonia