ANTI-SLIP VARNISH FOR WOODEN FLOORS AND STAIRS is an advanced two-component product based on water-based polyurethane resins, designed for the protection and decoration of wooden surfaces. Its non-slip properties reduce the risk of slipping, making it ideal for use on stairs and other heavily used wooden surfaces. The varnish coating is resistant to abrasion, dirt and moisture, which ensures long-term protection of the wood. Resistance to yellowing and UV radiation ensures color stability and aesthetic appearance for a long time. It is ideal for floors, parquet, stairs and other wooden surfaces. Additional benefits associated with slip protection include increased user safety, especially in areas exposed to moisture, such as kitchens, bathrooms or terraces. It can be used both for painting new surfaces and for renovating existing surfaces. In addition, it can be used in conjunction with a finishing varnish as an additional finishing layer, providing even greater durability and anti-slip protection.

SUBSTRATE PREPARATION:

› The surface to be painted must be dry, clean, degreased and sanded with sandpaper, and then cleaned of dust.
› Wash off greasy or resin-treated areas.
› Untreated wood (moisture max. 15%) and primed with a suitable primer.
› When painting renovations, remove old, flaking coatings from untreated wood, fill all cavities and cracks with a suitable filler and sand thoroughly with sandpaper after drying.
› To ensure proper adhesion of the varnish, before applying the next layer, the surface must be sanded with fine-grained sandpaper and then cleaned of dust.

APPLICATION:

› Immediately before painting, add component B to component A, mix thoroughly until a homogeneous mass is obtained. Note: use the finished varnish (mixed component A+B) within 2 hours.
› Apply the first coat of varnish to the previously prepared surface with a varnish roller, carefully smoothing it until an even layer is obtained, and wait for the coating to dry.
› The drying (hardening) time of the coating is approximately 8 hours and depends on the conditions at the place of application of the product (temperature and humidity).
› After the first coat has dried, apply the next coat of varnish in the same way. Note: apply the next coat from the prepared new portion of varnish (A+B component).
› It is recommended to apply the third coat of varnish on surfaces that are particularly exposed to water and weather conditions

ADDITIONAL INFORMATION:

› Use personal protective equipment when mixing and applying the paint.
› Do not dilute both components A and B.
› Optimal application conditions: temperature from +10°C to +30°C and relative humidity below 70%.
› Initial mechanical strength of the coating after 24 hours. The overall mechanical and chemical resistance of the coating is after 7 days, until then the painted surface must not be cleaned, protected from water, dirt and mechanical damage.
› For the care of the painted surface, use mild detergents. Do not use rough sponges.
› Wash tools with water and detergent immediately after painting.
› After mixing components A and B, the volume may expand strongly. Do not store in a closed container.

CONSUMPTION:

› Up to 12 m²/l, depending on the type of substrate and application method, indicated for one layer.

NUMBER OF LAYERS:

› 2 to 3 layers, depending on the type of substrate and the desired effect.

Manufacturer: INCHEM Poland