Universal latex paint with silicone additives for exterior and interior work, dilutable with water. Forms a weather-resistant, snow-white matte coating with excellent vapor permeability, wear resistance and wash resistance. Made from specialized 100% acrylic latex!

PURPOSE: intended for painting durable cement-lime and polymer-modified plasters, putties, concrete and other suitable mineral surfaces inside and outside buildings. Can be used for painting brick facades and insulation systems (especially with mineral wool). Used for painting facades of various buildings and structures, as well as interior walls and ceilings of rooms, especially those with high operational loads and wear resistance requirements.

SURFACE PREPARATION: clean the surface from dirt, dust and efflorescence. Remove old, cracked and flaking coatings. The surface must be dry and clean. New lime-cement-based surfaces must be allowed to dry for at least one month before painting. Before painting moisture-absorbing surfaces, prime them with BRILLIANT acrylic primer or (for weak, crumbling surfaces) UNIVERSAL; Facades on the north or shady side and surfaces in rooms with high humidity must be treated with W2 Kompozit® Antiseptic according to the instructions for use.

APPLICATION: mix the paint thoroughly before use, if necessary, dilute with water (up to 10%). Apply the paint with a roller, paint sprayer or synthetic bristle brush in 2 layers. Drying time at +20 °C and 50% relative humidity is 30 minutes, the next layer can be applied after 2–4 hours, but this time increases with decreasing temperature and increasing humidity. The surface coverage rate of one layer is 5–6 m²/kg depending on the surface and application method.

STORAGE CONDITIONS AND SAFETY: store and transport in hermetically sealed containers of the manufacturer at a temperature of +5 to +35 °C, out of the reach of children. Keep away from heating devices and direct sunlight. When applying by spraying, use a respirator. Clean wet tools from paint residues, preventing them from drying out, and rinse thoroughly with water. After drying, dispose of the container and product residues as construction waste.

Country of manufacture: Ukraine, TM Kompozit.