Acrylic Enamel METALLIQ Kompozit metallic, pearl:

https://krasa.lv/en/product/akrila-emalja-metalliq-kompozit-metalika-perle/

Colors: metallic gold, metallic silver, pearl, black pearl

PURPOSE: for indoor and outdoor painting of wood, mineral, polystyrene, primed metal surfaces, old alkyd and oil enamels. Used for forging, souvenirs, picture frames, baguettes, monuments; creating various decorative effects.

SURFACE PREPARATION: thoroughly clean the surface from dirt and dust. Porous and metal surfaces must be primed beforehand.

USE: mix thoroughly before use. If necessary, dilute with water (up to 10%). The colors can be mixed with each other in any proportion, as well as with acrylic varnish to obtain a transparent decorative glaze. Apply with a brush (with synthetic bristles), roller or spray gun at temperatures from +5 to +30 °C. For decorative effects, apply enamel with a velor roller and immediately create the desired pattern with chaotic or directed movements of a brush, spatula or any other tool over the wet layer. You can also use a decorative roller, stencil, sponge and other special tools. Drying time at +20 °C and 50% relative air humidity is up to 1 hour, the next layer can be applied after 1 – 2 hours. Surface coverage coefficient in one layer: 6 – 8.5 m2 /kg, depending on surface roughness and application technique.

STORAGE CONDITIONS AND SAFETY: store in a closed branded container at a temperature of +5 to +30 °C, out of the reach of children. Protect from direct sunlight, heaters and moisture. Use a respirator when spraying. Clean working tools from enamel residues without allowing them to dry out and rinse thoroughly with water. The container and product residues are disposed of as construction waste after drying.

Country of manufacture: Ukraine