PAINT FOR FLOOR TILES AND SHOWER ENCLOSURES is a two-component, water-based polyurethane resin system designed for the restoration and protection of various types of indoor ceramic surfaces. It provides effective protection against moisture and dirt, making it ideal for shower enclosure walls and floors exposed to moisture and frequent soiling. It offers excellent coverage, while its satin finish gives tiles an elegant, modern look. The paint creates an easy-to-clean coating that is resistant to neutral detergents, cleaning agents, grease, and other types of dirt. It is suitable for use on ceramic tiles, stoneware tiles, clinker, terracotta, sandstone, gypsum tiles, and decorative trim. Easy to apply, it results in a smooth surface with an outstanding decorative effect. It is ideal for refurbishing wall tiles in bathrooms and other areas prone to moisture.<\/p>\n
SURFACE PREPARATION:
\n\u203a The surface to be painted must be dry, clean, and free of grease. Before painting, it is essential to remove all dirt, grease stains, deposits, and salt efflorescence.
\n\u203a Fill any voids or cracks in the grout or tiles with a suitable repair compound; once dry, sand the area thoroughly with sandpaper.
\n\u203a Remove any silicone joints or sealants and reapply them after the paint has dried.
\n\u203a Before painting, thoroughly clean and degrease the surface of the tiles and grout using appropriate cleaning agents, then rinse well with water and allow to dry.
\n\u203a To ensure proper paint adhesion, sand the tiles and grout with fine-grit sandpaper and remove any dust. In areas frequently exposed to water, the use of a suitable primer is recommended.
\n\u203a To ensure proper paint adhesion, sand the dried surface with fine-grit sandpaper and remove any dust before applying the next coat.<\/p>\n
APPLICATION:
\n\u203a Immediately before painting, add Component B to Component A and mix thoroughly until a uniform mixture is obtained. Note: The prepared paint (the mixture of Components A and B) must be used within 2 hours. \u203a Apply the first coat of paint to the prepared surface using a velour roller, smoothing it out carefully until an even layer is achieved, and allow the coating to dry.
\n\u203a The drying (curing) time for the coating is approximately 8 hours, depending on the conditions at the application site (temperature and humidity).
\n\u203a Once the first coat has dried, apply a second coat in the same manner. Note: Use a freshly prepared batch of paint (components A+B) for the second coat.<\/p>\n
ADDITIONAL INFORMATION:
\n\u203a Use personal protective equipment when mixing and applying the paint.
\n\u203a Do not dilute either component A or component B.
\n\u203a Optimal application conditions: temperature between +10\u00b0C and +30\u00b0C, and relative humidity below 70%.
\n\u203a The coating develops initial mechanical resistance after 24 hours. It reaches full mechanical and chemical resistance after 15 days; until then, do not clean the painted surface and protect it from water, dirt, and mechanical damage.
\n\u203a Use mild cleaning agents to maintain the painted surface. Do not use abrasive sponges. \u203a Immediately after painting, wash the tools with water and a cleaning agent.
\n\u203a After mixing components A and B, the container may open suddenly and forcefully. Do not store the mixture in a sealed container.<\/p>\n
COVERAGE:
\n\u203a Up to 12 m\u00b2\/l, depending on the type of substrate and the application method. Coverage is indicated for a single coat.<\/p>\n
NUMBER OF COATS:
\n\u203a 2 to 3 coats, depending on the type of substrate and the desired effect.<\/p>\n
Manufacturer:<\/strong> INCHEM POLONIA Ltd<\/p>\n","protected":false},"excerpt":{"rendered":" \u27a2Two-component Color:<\/strong><\/p>\n white<\/p>\n black<\/p>\n soft beige<\/p>\n deep anthracite<\/p>\n ash gray<\/p>\n Gloss level:<\/strong> Satin<\/p>\n","protected":false},"featured_media":35991,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[1096,1155],"product_tag":[6958],"yoast_head":"\n
\n\u27a2Protects and decorates
\n\u27a2Protection against moisture and dirt
\n\u27a2Resistant to wear and scratches<\/p>\n