EPOXY PAINT is a modern two-component paint designed for the protection and decoration of interior surfaces.<\/p>\n
EPOXY PAINT consists of two components: A and B, which, when mixed and applied
\nto a surface, form a durable, stain-resistant, and damage-resistant coating
\nwith excellent adhesion to the substrate. It features high hardness, resistance to
\nscrubbing, and mechanical damage. The paint provides chemical resistance to
\nthe substrate. It is recommended for protecting floors in areas with heavy mechanical
\nload, including pedestrian traffic, vehicle paths, and forklift traffic (vehicles
\nwith rubber tires), such as basements, garages, corridors, parking lots, halls,
\nwarehouses, technical rooms, and all high-traffic areas.
\nDue to its vapor permeability properties,<\/p>\n
EPOXY PAINT is also suitable for protective
\nand decorative painting of walls and ceilings in areas with increased humidity.<\/p>\n
INTENDED USE
\nApplicable on surfaces types: concrete, self-leveling screeds, plaster, other substrates
\n(floors and walls) subject to mechanical damage, difficult-to-remove
\nstains, or dampness.<\/p>\n
Recommended for:
\n\u2022 Utility rooms, garages, and basements
\n\u2022 Industrial and public utility facilities
\n\u2022 Private buildings
\n\u2022 Commercial and warehouse spaces
\n\u2022 Service workshops
\n\u2022 Corridors, stairs, halls, and other high-traffic areas<\/p>\n
NOTE: For indoor use only.<\/p>\n
SURFACE PREPARATION:<\/p>\n
\u203a The surface to be painted must be sufficiently cured, degreased, clean, and dry; all dirt, grease stains, deposits, and efflorescence must be removed.
\n\u203a Mechanically smoothed concrete and smooth, dense surfaces must be roughened to ensure proper coating adhesion.
\n\u203a For renovation painting, remove old coatings, fill damaged areas, remove any remaining impregnating agents, then sand the surface and thoroughly remove all dust.
\n\u203a Prime highly absorbent surfaces with the EPOXY PAINT, diluted with 20% water.<\/p>\n
APPLICATION:<\/p>\n
\u203a Immediately before painting, add component B to component A and mix thoroughly until a homogeneous mixture is obtained. After mixing components A and B, let the paint stand for 5 minutes, then mix again and use within 2 hours. \u203a Apply the first coat using a roller or brush suitable for epoxy paints and allow it to dry\u2014the curing time is approximately 12 hours.
\n\u203a Just before applying the second coat, add component B to component A and mix thoroughly until a homogeneous mixture is obtained. After mixing components A and B, let the paint sit for 5 minutes, then mix again and use within 2 hours.<\/p>\n
\u203a Apply the second coat using a roller or brush suitable for epoxy paints and allow it to dry\u2014the curing time is approximately 12 hours.<\/p>\n
ADDITIONAL INFORMATION:<\/p>\n
\u203a Use personal protective equipment when mixing and applying the paint.
\n\u203a Optimal application conditions: temperature between +10\u00b0C and +30\u00b0C and relative humidity below 70%.
\n\u203a Initial surface protection is achieved after 72 hours. Full coating durability is reached after 7 days.
\n\u203a Wash tools with water and detergent immediately after painting.<\/p>\n
CONSUMPTION:<\/p>\n
\u203a Up to 6 m\u00b2\/kg, depending on the substrate’s absorbency and type, as well as the application method. Consumption is indicated for a single coat.<\/p>\n
NUMBER OF COATS:<\/p>\n
\u203a 2 to 3 coats, depending on the substrate type and the desired result.<\/p>\n
Manufacturer:\u00a0\u00a0Inchem Polonia Sp. z o.o.<\/p>\n","protected":false},"excerpt":{"rendered":"
\u27a2 Two-component
\n\u27a2 Water-based
\n\u27a2 For decoration and protection
\n\u27a2 Chemical and mechanical resistance
\n\u27a2 Excellent hiding power<\/p>\n
Color:<\/strong><\/p>\n RAL 7035 Light grey<\/p>\n RAL 7040 Grey<\/p>\n RAL 7016 Anthracite grey<\/p>\n Sheen level:<\/strong> Satin<\/p>\n","protected":false},"featured_media":35853,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[1096,1155],"product_tag":[6948],"yoast_head":"\n