YACHT VARNISH is a high-quality polyurethane single-component product, the formula of which is based on water-based acrylic resins. It perfectly combines protective and decorative properties, therefore it is ideal for varnishing various wooden surfaces and wooden materials, such as wooden yacht equipment, gazebos, fences, railings, window frames, cladding, furniture, etc.<\/p>\n
YACHT VARNISH forms a durable coating that is resistant to wear and dirt, as well as protects the wood against biocorrosion and UV radiation. It effectively protects the wood against moisture, including salt water, which is especially important when using the product on yacht elements.<\/p>\n
YACHT VARNISH is suitable for use both indoors and outdoors. It can be used both for painting new surfaces and for restoring existing surfaces. It perfectly highlights the natural grain of the wood, giving the surface an aesthetic appearance. In addition, it can be used together with the tinted product WOOD STAIN as an additional finishing coat, providing even greater protection and durability.<\/p>\n
SUBSTRATE PREPARATION:
\n\u203a The surface to be painted must be dry, clean, degreased and sanded with sandpaper, then cleaned of dust.
\n\u203a Wash off greasy or resinous areas with extraction gasoline.
\n\u203a Untreated wood must be weathered (moisture max. 15%) and primed with a suitable primer.
\n\u203a In the case of restoration painting, remove old, peeling coatings to clean wood, fill all cavities and cracks with a suitable filler and sand thoroughly with sandpaper after drying.
\n\u203a To ensure proper adhesion of the varnish, the surface must be sanded with fine-grained sandpaper and then cleaned of dust before applying the next coat.<\/p>\n
USE:
\n\u203a Stir the product thoroughly immediately before painting. Do not dilute.
\n\u203a Apply the first coat of varnish to a previously prepared surface with a brush or roller, carefully smoothing in the direction of the wood grain until an even coat is obtained, and wait until the coating dries.
\n\u203a The drying time of the coating is approximately 2 hours and depends on the conditions of the product application site (temperature and humidity).
\n\u203a Before applying the next coat, if the wood fibers lift, the coating should be sanded with fine-grained sandpaper and thoroughly cleaned of dust.
\n\u203a It is recommended to apply the third coat of varnish to surfaces that are particularly exposed to water and weather.<\/p>\n
ADDITIONAL INFORMATION:
\n\u203a The product is not recommended for use on wood species with a high tannin content, such as oak and exotic woods.
\n\u203a Optimal application conditions: temperature from +10\u00b0C to +30\u00b0C and relative humidity below 70%.
\n\u203a Initial surface protection after 24 hours. The coating is fully resistant after 7 days; do not clean the painted surface until then, protect it from water, dirt and mechanical damage.
\n\u203a Use mild detergents to care for the painted surface. Do not use rough sponges.
\n\u203a Wash tools with water and detergent immediately after painting.<\/p>\n
CONSUMPTION:
\n\u203a Up to 15 m2\/l depending on the application method, especially the type and species of wood to be painted. Consumption is indicated for one coat.<\/p>\n
NUMBER OF COATS:
\n\u203a 2 to 3 coats depending on the type of substrate and the desired effect.<\/p>\n
SHELF LIFE:
\n\u203a 60 months from the date of production. After opening, use within 6 months.<\/p>\n
TRANSPORTATION AND STORAGE:
\n\u203a Store and transport in hermetically sealed original packaging at temperatures from +5\u00b0C to +40\u00b0C. Protect from frost.<\/p>\n
NOTES:
\n\u203a Keep out of reach of children.
\n\u203a In case of ingestion, consult a doctor.
\n\u203a VOC content limit value (cat. A\/e\/WB): 130 g\/l. The product contains max. 130 g\/l.
\n\u203a Contains 1,2-benzoisothiazol-3(2H)-one. May cause an allergic reaction.
\n\u203a Detailed safety information is indicated on the product packaging and in the safety data sheet.<\/p>\n
Country of manufacture: Poland<\/p>\n","protected":false},"excerpt":{"rendered":"
Main characteristics:<\/strong><\/p>\n \u27a2 Single-component<\/p>\n \u27a2 Protects and decorates<\/p>\n \u27a2 Quick-drying<\/p>\n \u27a2 Wear-resistant<\/p>\n \u27a2 UV protection<\/p>\n \u203a Up to 15 m2\/l depending on the application method, per coat<\/p>\n \u203a 2 to 3 coats depending on the type of substrate and the desired effect<\/p>\n \u203a A third coat of varnish is recommended for surfaces particularly exposed to water and weather<\/p>\n Color: transparent
\nEffect: satin<\/p>\n","protected":false},"featured_media":35562,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[6070],"product_tag":[6936],"yoast_head":"\n