IMPREGNANT FOR GRAVESTONES
\na water-based solution that uses innovative fluoropolymer technology.
\nIt is a formula without organic solvents, making the product safe for both users and the environment.<\/p>\n
FEATURES
\n\u2022 Transparent protective barrier: a transparent protective layer that not only improves the appearance of tombstones, but also protects their surface
\n\u2022 Water and oil resistance: prevents the penetration of water, grease and dirt, effectively protecting stone tombstones from stains
\n\u2022 Preserves natural appearance: does not change the natural appearance of the stone, preserving the original aesthetics of the tombstones
\n\u2022 Does not yellow or form a coating: does not yellow or form a coating on the surface of the stone, providing long-lasting protection without compromising aesthetics
\n\u2022 Versatile use: suitable for tombstones made of various materials, such as granite, marble, terrazzo and other stones
\n\u2022 Protection against external factors: rain, frost, moss and other harmful atmospheric factors, helping to preserve their appearance and durability
\n\u2022 Ease of use: easy to apply to both new and older tombstones, providing comprehensive protection<\/p>\n
INSTRUCTIONS FOR USE:
\n\u203a The surface to be impregnated must be dry, clean and free of grease. It is important to remove all dirt, greasy stains, stains and efflorescence before impregnation.
\n\u203a Stir the product thoroughly immediately before impregnation. Do not dilute. Always carry out a test on the substrate.
\n\u203a The substrate must be impregnated with a brush, roller or sprayer, applying one or two coats using the “wet on wet” method.
\n\u203a Do not apply an excessive amount of the preparation to the substrate, remove the excess before drying.
\n\u203a On vertical surfaces, apply from the bottom up.
\n\u203a Drying time is approximately 4 hours and depends on the conditions at the application site (temperature and humidity).<\/p>\n
ADDITIONAL INFORMATION:
\n\u203a Optimal conditions of use: temperature from +10\u00b0C to +30\u00b0C and relative humidity below 70%.
\n\u203a Initial surface protection after 24 hours. Full protection after 7 days, until then do not clean the impregnated surface, protect from water and dirt, as well as mechanical damage.
\n\u203a For the care of the impregnated surface, use mild detergents. Do not use rough sponges.
\n\u203a Immediately clean spills from the impregnated surface. Prolonged contact of spilled liquids with the impregnated surface may cause slight discoloration.
\n\u203a It is recommended to re-impregnate the surface after 1 year.
\n\u203a After painting, wash tools immediately with water and detergent.<\/p>\n
CONSUMPTION:
\n\u203a 20\u201340 m\u00b2\/l, depending on the application method, and in particular on the type and degree of absorption of the substrate. The effectiveness is indicated for one layer.<\/p>\n
NUMBER OF LAYERS:
\n\u203a 1 to 2 layers, depending on the type and degree of absorption of the substrate.<\/p>\n
Manufacturer: Inchem Polonia<\/p>\n","protected":false},"excerpt":{"rendered":"
IMPREGNANT FOR GRAVESTONES a water-based solution that uses innovative fluoropolymer technology. It is a formula without organic solvents, making the product safe for both users and the environment. FEATURES \u2022 Transparent protective barrier: a transparent protective layer that not only improves the appearance of tombstones, but also protects their surface \u2022 Water and oil resistance: […]<\/p>\n","protected":false},"featured_media":35044,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[450,1155],"product_tag":[6894],"yoast_head":"\n