PUR ENAMEL is a high-quality, polyurethane-based two-component enamel designed for the protection and decoration of concrete, microcement and porous surfaces.<\/p>\n
Suitable for both indoor and outdoor use, providing a durable finish with excellent adhesion, chemical and mechanical resistance, effectively protects surfaces from
\nmoisture, stains and UV radiation, improving their aesthetic appeal, while ensuring long-term durability.<\/p>\n
APPLICATION\/PURPOSE:<\/p>\n
\u2022 Concrete floors
\n\u2022 Anhydrite and epoxy concrete screeds
\n\u2022 Cement screeds, underlays and leveling compounds
\n\u2022 For new and renovated concrete surfaces
\n\u2022 For microcement surfaces
\n\u2022 For porous surfaces, e.g. unpolished stones, clinkers, bricks<\/p>\n
Application examples:<\/p>\n
\u2022 Utility rooms, garages and basements
\n\u2022 Industrial and public utility buildings
\n\u2022 Private buildings
\n\u2022 Commercial and warehouse premises
\n\u2022 Service workshops
\n\u2022 Traffic routes, stairs, halls and corridors<\/p>\n
SUBSTRATE PREPARATION:<\/p>\n
\u203a The surface to be painted must be dry, clean, degreased and sanded with sandpaper, then cleaned of dust.
\n\u203a Oily or resin-treated areas must be washed with gasoline.
\n\u203a Untreated wood must be treated with moisture (humidity max. 15%) and primed with a suitable primer.
\n\u203a When painting renovations, old, peeling coatings must be removed. Fill all cavities and cracks with a suitable mass and sand thoroughly with sandpaper after drying.
\n\u203a To reduce absorption, the substrate must be primed with GRUNT primer.
\n\u203a To achieve proper enamel adhesion, the dried surface must be sanded with fine-grained sandpaper before applying the next layer and then dusted.<\/p>\n
APPLICATION:<\/p>\n
\u203a Immediately before painting, add component B to component A, mix thoroughly until a homogeneous mass is obtained. Note: use the finished enamel (mixed component A+B) within 2 hours.
\n\u203a Apply the first coat of enamel to the previously prepared surface with a velour roller, carefully smoothing until an even layer is obtained, and wait until the coating dries.
\n\u203a The drying (hardening) time of the coating is approximately 8 hours and depends on the conditions at the place of application of the product (temperature and humidity).<\/p>\n
\u203a After the first coat has dried, apply the second coat of enamel in the same way. Note: apply the second coat from the prepared new part of the enamel (component A+B).<\/p>\n
ADDITIONAL INFORMATION:<\/p>\n
\u203a Use personal protective equipment when mixing and applying the enamel.
\n\u203a Do not dilute both component A and B.
\n\u203a Optimal conditions of use: temperature from +10\u00b0C to +30\u00b0C and relative humidity below 70%.<\/p>\n
\u203a Initial mechanical strength of the coating after 24 hours. Total mechanical and chemical strength of the coating after 7 days, until then the painted surface must not be cleaned, protected from water, dirt and mechanical damage.
\n\u203a Mild detergents should be used to care for the painted surface. Do not use rough sponges.
\n\u203a Wash tools with water and detergent immediately after painting.
\n\u203a After mixing components A and B, the can may open violently. Do not store in a closed container.<\/p>\n
CONSUMPTION:<\/p>\n
\u203a Up to 12 m\u00b2\/l, depending on the type of substrate and application method. Efficiency is indicated for one layer.<\/p>\n
NUMBER OF LAYERS:<\/p>\n
\u203a 2 to 3 layers, depending on the type of substrate and the desired effect.<\/p>\n
Manufacturer: Inchem Polonia<\/p>\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
Color:<\/p>\n
RAL 7035<\/p>\n
RAL 7040<\/p>\n
RAL 7016<\/p>\n","protected":false},"featured_media":35006,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[1096,454,1155],"product_tag":[6881],"yoast_head":"\n