GLAMOUR EFFECT GLAZE is a transparent, one-component varnish that provides
\nhigh-quality, durable coatings with resistance to wear and stains.<\/p>\n
It is available in two finishes: glossy and matte. The varnish can be used as a separate
\ncoat for walls or as a base for decorative effects (acrylic paints, metallic, pearl, pigment concentrates with special effects, glitter shines)<\/p>\n
PURPOSE OF USE
\n\u2022 Creation of original decorative effects: Ideal for improving the appearance of surfaces
\nwith unique effects.
\n\u2022 Improvement of color depth and saturation: Provides a glossy or matte finish to the decor, depending on the type of varnish chosen.
\n\u2022 Protective coating: Creates a protective layer against dirt, making it easier to clean
\npainted surfaces.
\n\u2022 Suitable for use in rooms exposed to dirt, such as children’s rooms, kitchens,
\nhallways and staircases.
\n\u2022 Also effective for painting panels.<\/p>\n
APPLICATION:<\/p>\n
\u203a The surface to be painted must be prepared, degreased, clean and dry.
\n\u203a Stir the product thoroughly immediately before painting. Do not dilute.
\n\u203a Apply a coat of varnish to the previously prepared surface using a short-haired roller intended for varnishes, carefully smoothing it over the surface from the bottom up until an even layer is obtained, and wait for the coating to dry.
\n\u203a When applying the varnish with a brush or sponge, apply it to the surface unevenly, “spotted”, with irregular movements, leaving free (unpainted) areas that must be gradually filled until the entire surface is covered, and let it dry.
\n\u203a The drying time of the coating is approximately 2 hours and depends on the conditions at the place of application of the product (temperature and humidity).<\/p>\n
DECORATIVE EFFECTS:<\/p>\n
\u2713 To create a metallic shine, add 80 ml of effect Metallic paste to 750 ml of GLAMOUR effect GLAZE and mix thoroughly until a homogeneous mass is obtained. Apply in the same way as the varnish itself.
\n\u2713 To obtain a sparkling effect, add 10 g to 70 g of Glitter to 750 ml of GLAMOUR effect GLAZE and mix thoroughly until a homogeneous mass is obtained. Apply in the same way as the varnish itself.
\n\u2713 GLAMOUR effect GLAZE can also be colored with pigment concentrate to obtain a colored transparent coating. Add no more than 80 ml of pigment concentrate to 750 ml of GLAMOUR effect GLAZE and mix thoroughly until a homogeneous mass is obtained. Apply in the same way as the varnish itself.
\nADDITIONAL INFORMATION:<\/p>\n
\u203a Optimal application conditions: temperature from +10\u00b0C to +30\u00b0C and relative humidity below 70%.
\n\u203a Initial surface protection after 24 hours. The coating is fully durable after 7 days, until then the painted surface must not be cleaned, protected from water, dirt and mechanical damage.
\n\u203a Mild detergents should be used to care for the painted surface. Do not use rough sponges.
\n\u203a Wash tools with water and detergent immediately after painting.<\/p>\n
CONSUMPTION:<\/p>\n
\u203a Up to 20 m\u00b2\/l, depending on the type of substrate and application method.<\/p>\n
NUMBER OF COATS:<\/p>\n
\u203a 1 coat.<\/p>\n
Manufacturer: Inchem Polonia<\/p>\n","protected":false},"excerpt":{"rendered":"
COLOR \/ EFFECT
\nColor: colorless
\nEffect: matte or glossy<\/p>\n","protected":false},"featured_media":34989,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[6041,6057,6070],"product_tag":[6878],"yoast_head":"\n