The mastic is intended for laying a seamless waterproofing coating, as well as for warming the underground parts of the building. Perfectly suited for a temperate climate, the mastic creates a coating with high resistance to cracking due to frost, the coating firmly connects to the surface and completely stabilizes its movement and microcracks.
\nThe aim:
\n\u2022 for waterproofing of underground structures or their parts, reservoirs.
\n\u2022 for repairing bitumen roof coverings<\/p>\n
PREPARATION:
\nDo not use on frozen or flooded surfaces. Clean the surface of dirt, glue, dust, loose parts and sharp edges. Clean the rust from the metal surface. If the surface is porous, level it with cement mortar and fill the voids. Highly absorbent concrete substrates, or substrates exposed to high water loads, should be primed with a bituminous primer and allowed to dry. Remove protruding pieces of roofing material and other debris before re-roofing. Curved areas should be cut crosswise and glued with cold glue, the surface should be primed.
\nUSE:
\nUse cold. When working in the cold season, it is recommended to place the package with the product in a warm room for 1-2 days to make it easier to work. Mix well before use. To prime the surface, apply 1 layer with a brush or trowel. For waterproofing, apply 3 layers with a brush or sprayer, each after the previous layer has dried. The product contains an organic solvent – do not use it in contact with polystyrene foam. For outdoor use only, do not use in areas where it is in direct contact with living spaces such as above ground balconies and terraces. Do not heat over an open flame.
\nTECHNICAL DATA:
\n\u2022 consumption: 0.6-0.8 kg\/m\u00b2 per layer.
\n\u2022 number of layers: 2-3, depending on use.
\n\u2022 drying time: up to 12 hours;
\n\u2022 non-sticky surface: after 6 hours;
\n\u2022 air and substrate temperature during use: from +5\u00b0C to +35\u00b0
\nCleaning tools: with white spirit or other organic solvents.
\nDANGEROUS! Contains: Ligroin solvent, xylene and styrene fraction. H315 – Irritating to skin. H319 – Causes severe eye irritation. H361 – Suspected of damaging fertility or the unborn child. P102 – Keep out of reach of children. P202 – Do not use unless all safety warnings have been read and understood. P280 – Wear protective gloves\/ protective clothing\/ eye (face) protection. P303+P361+P353 – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Wash the skin with a jet of water. P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easily removable. Continue to wash your eyes. P403+P235 – Store in a well-ventilated place. Store in a cool place.
\nTechnical data and information are provided for use at a temperature of +23\u00b0C \u00b1 2\u00b0C and a relative humidity of approximately 50%. Lower temperatures and higher humidity increase the drying time.
\nSTORAGE:
\nStore in a cool, dry place in a tightly closed package. Can be stored at minus temperature. Protect from direct sunlight.
\nThe production date and expiration date are indicated on the package.
\nStorage and stacking – on the 4th floor.
\nManufacturer: “Izolacja Matizol” Sp. z o. o. EU<\/p>\n","protected":false},"excerpt":{"rendered":"
The mastic is intended for laying a seamless waterproofing coating, as well as for warming the underground parts of the building. Perfectly suited for a temperate climate, the mastic creates a coating with high resistance to cracking due to frost, the coating firmly connects to the surface and completely stabilizes its movement and microcracks. The […]<\/p>\n","protected":false},"featured_media":25943,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[449,1155,1158],"product_tag":[],"yoast_head":"\n