The paint is intended for finishing and protective painting of concrete bases inside and outside living spaces. It will give the surface a pleasant visual effect and perfectly hide surface damage and defects.<\/p>\n
Properties:<\/strong> High resistance to atmospheric factors, excellent adhesion to the base, resistant to washing and rubbing, increased resistance to wear.<\/p>\n Use:<\/strong> The paint is intended for finishing and protective painting of concrete bases inside and outside living spaces. Paint for exterior works is especially recommended for concrete fences and various constructions, house facades, terraces, garden paths, garages, balconies, as well as floors that are not exposed to intensive use.<\/p>\n Preparation of the substrate:<\/strong>\u00a0 The substrate must be hard, rough, dry, free of dust and degreased. Fresh plasters and concrete substrates can be painted after 4 weeks of curing. Old applied coatings that do not adhere well to glue, lime, paint must be removed, washed with water and special detergents and rinsed before applying paint. Then leave it all to dry. It is recommended to treat a newly laid smooth concrete floor with technical hydrochloric acid 14%. Primer is recommended on substrates that are highly absorbent, porous, brittle, crumbling and dusty. Areas affected by the fungus should be cleaned and treated with an antifungal agent, while eliminating the cause of the fungus.<\/p>\n Application:<\/strong> Mix the paint thoroughly before application. To paint the first layer, the product is diluted by adding clean water up to 20%. When painting, the temperature of the surrounding environment and the substrate should be between +10 \u00b0C and +30 \u00b0C. During the application and drying of the paint, there must be good weather conditions. Apply by brush, roller or spray in two coats on primed substrates, the next coat after drying, i.e. after about 4 hours. Apply three coats of paint to substrates subject to wear and tear. The first layer is applied with a brush, rubbing the paint into the base, the next – with a roller or by spraying. After finishing the painting work, wash the tools with water.<\/p>\n Consumption:<\/strong> up to 8 m\u00b2\/l with one painting – depending on the type of substrate and application method.<\/p>\n Manufacturer:<\/strong> Fabryka Farb i Lakier\u00f3w Sniezka SA Specify the color tone when placing the order!<\/p>\n Available colors:<\/strong><\/p>\n RAL9010 – white<\/p>\n RAL7046 – light gray<\/p>\n RAL3009 – red oxide<\/p>\n RAL7024 – graphite gray<\/p>\n","protected":false},"featured_media":25121,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[1091,1096,1155],"product_tag":[],"yoast_head":"\n
\nAl. 23 of John Paul II
\n00-854 Warszawa \u2013 Poland<\/p>\n","protected":false},"excerpt":{"rendered":"